| Current File : //usr/include/linux/if.h |
/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
* operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* Global definitions for the INET interface module.
*
* Version: @(#)if.h 1.0.2 04/18/93
*
* Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
* Ross Biro
* Fred N. van Kempen, <[email protected]>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _LINUX_IF_H
#define _LINUX_IF_H
#include <linux/types.h> /* for "__kernel_caddr_t" et al */
#include <linux/socket.h> /* for "struct sockaddr" et al */
/* for "__user" et al */
#define IFNAMSIZ 16
#define IFALIASZ 256
#include <linux/hdlc/ioctl.h>
/**
* enum net_device_flags - &struct net_device flags
*
* These are the &struct net_device flags, they can be set by drivers, the
* kernel and some can be triggered by userspace. Userspace can query and
* set these flags using userspace utilities but there is also a sysfs
* entry available for all dev flags which can be queried and set. These flags
* are shared for all types of net_devices. The sysfs entries are available
* via /sys/class/net/<dev>/flags. Flags which can be toggled through sysfs
* are annotated below, note that only a few flags can be toggled and some
* other flags are always always preserved from the original net_device flags
* even if you try to set them via sysfs. Flags which are always preserved
* are kept under the flag grouping @IFF_VOLATILE. Flags which are __volatile__
* are annotated below as such.
*
* You should have a pretty good reason to be extending these flags.
*
* @IFF_UP: interface is up. Can be toggled through sysfs.
* @IFF_BROADCAST: broadcast address valid. Volatile.
* @IFF_DEBUG: turn on debugging. Can be toggled through sysfs.
* @IFF_LOOPBACK: is a loopback net. Volatile.
* @IFF_POINTOPOINT: interface is has p-p link. Volatile.
* @IFF_NOTRAILERS: avoid use of trailers. Can be toggled through sysfs.
* Volatile.
* @IFF_RUNNING: interface RFC2863 OPER_UP. Volatile.
* @IFF_NOARP: no ARP protocol. Can be toggled through sysfs. Volatile.
* @IFF_PROMISC: receive all packets. Can be toggled through sysfs.
* @IFF_ALLMULTI: receive all multicast packets. Can be toggled through
* sysfs.
* @IFF_MASTER: master of a load balancer. Volatile.
* @IFF_SLAVE: slave of a load balancer. Volatile.
* @IFF_MULTICAST: Supports multicast. Can be toggled through sysfs.
* @IFF_PORTSEL: can set media type. Can be toggled through sysfs.
* @IFF_AUTOMEDIA: auto media select active. Can be toggled through sysfs.
* @IFF_DYNAMIC: dialup device with changing addresses. Can be toggled
* through sysfs.
* @IFF_LOWER_UP: driver signals L1 up. Volatile.
* @IFF_DORMANT: driver signals dormant. Volatile.
* @IFF_ECHO: echo sent packets. Volatile.
*/
enum net_device_flags {
IFF_UP = 1<<0, /* sysfs */
IFF_BROADCAST = 1<<1, /* __volatile__ */
IFF_DEBUG = 1<<2, /* sysfs */
IFF_LOOPBACK = 1<<3, /* __volatile__ */
IFF_POINTOPOINT = 1<<4, /* __volatile__ */
IFF_NOTRAILERS = 1<<5, /* sysfs */
IFF_RUNNING = 1<<6, /* __volatile__ */
IFF_NOARP = 1<<7, /* sysfs */
IFF_PROMISC = 1<<8, /* sysfs */
IFF_ALLMULTI = 1<<9, /* sysfs */
IFF_MASTER = 1<<10, /* __volatile__ */
IFF_SLAVE = 1<<11, /* __volatile__ */
IFF_MULTICAST = 1<<12, /* sysfs */
IFF_PORTSEL = 1<<13, /* sysfs */
IFF_AUTOMEDIA = 1<<14, /* sysfs */
IFF_DYNAMIC = 1<<15, /* sysfs */
IFF_LOWER_UP = 1<<16, /* __volatile__ */
IFF_DORMANT = 1<<17, /* __volatile__ */
IFF_ECHO = 1<<18, /* __volatile__ */
};
#define IFF_UP IFF_UP
#define IFF_BROADCAST IFF_BROADCAST
#define IFF_DEBUG IFF_DEBUG
#define IFF_LOOPBACK IFF_LOOPBACK
#define IFF_POINTOPOINT IFF_POINTOPOINT
#define IFF_NOTRAILERS IFF_NOTRAILERS
#define IFF_RUNNING IFF_RUNNING
#define IFF_NOARP IFF_NOARP
#define IFF_PROMISC IFF_PROMISC
#define IFF_ALLMULTI IFF_ALLMULTI
#define IFF_MASTER IFF_MASTER
#define IFF_SLAVE IFF_SLAVE
#define IFF_MULTICAST IFF_MULTICAST
#define IFF_PORTSEL IFF_PORTSEL
#define IFF_AUTOMEDIA IFF_AUTOMEDIA
#define IFF_DYNAMIC IFF_DYNAMIC
#define IFF_LOWER_UP IFF_LOWER_UP
#define IFF_DORMANT IFF_DORMANT
#define IFF_ECHO IFF_ECHO
#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\
IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
#define IF_GET_IFACE 0x0001 /* for querying only */
#define IF_GET_PROTO 0x0002
/* For definitions see hdlc.h */
#define IF_IFACE_V35 0x1000 /* V.35 serial interface */
#define IF_IFACE_V24 0x1001 /* V.24 serial interface */
#define IF_IFACE_X21 0x1002 /* X.21 serial interface */
#define IF_IFACE_T1 0x1003 /* T1 telco serial interface */
#define IF_IFACE_E1 0x1004 /* E1 telco serial interface */
#define IF_IFACE_SYNC_SERIAL 0x1005 /* can't be set by software */
#define IF_IFACE_X21D 0x1006 /* X.21 Dual Clocking (FarSite) */
/* For definitions see hdlc.h */
#define IF_PROTO_HDLC 0x2000 /* raw HDLC protocol */
#define IF_PROTO_PPP 0x2001 /* PPP protocol */
#define IF_PROTO_CISCO 0x2002 /* Cisco HDLC protocol */
#define IF_PROTO_FR 0x2003 /* Frame Relay protocol */
#define IF_PROTO_FR_ADD_PVC 0x2004 /* Create FR PVC */
#define IF_PROTO_FR_DEL_PVC 0x2005 /* Delete FR PVC */
#define IF_PROTO_X25 0x2006 /* X.25 */
#define IF_PROTO_HDLC_ETH 0x2007 /* raw HDLC, Ethernet emulation */
#define IF_PROTO_FR_ADD_ETH_PVC 0x2008 /* Create FR Ethernet-bridged PVC */
#define IF_PROTO_FR_DEL_ETH_PVC 0x2009 /* Delete FR Ethernet-bridged PVC */
#define IF_PROTO_FR_PVC 0x200A /* for reading PVC status */
#define IF_PROTO_FR_ETH_PVC 0x200B
#define IF_PROTO_RAW 0x200C /* RAW Socket */
/* RFC 2863 operational status */
enum {
IF_OPER_UNKNOWN,
IF_OPER_NOTPRESENT,
IF_OPER_DOWN,
IF_OPER_LOWERLAYERDOWN,
IF_OPER_TESTING,
IF_OPER_DORMANT,
IF_OPER_UP,
};
/* link modes */
enum {
IF_LINK_MODE_DEFAULT,
IF_LINK_MODE_DORMANT, /* limit upward transition to dormant */
};
/*
* Device mapping structure. I'd just gone off and designed a
* beautiful scheme using only loadable modules with arguments
* for driver options and along come the PCMCIA people 8)
*
* Ah well. The get() side of this is good for WDSETUP, and it'll
* be handy for debugging things. The set side is fine for now and
* being very small might be worth keeping for clean configuration.
*/
struct ifmap {
unsigned long mem_start;
unsigned long mem_end;
unsigned short base_addr;
unsigned char irq;
unsigned char dma;
unsigned char port;
/* 3 bytes spare */
};
struct if_settings {
unsigned int type; /* Type of physical device or protocol */
unsigned int size; /* Size of the data allocated by the caller */
union {
/* {atm/eth/dsl}_settings anyone ? */
raw_hdlc_proto *raw_hdlc;
cisco_proto *cisco;
fr_proto *fr;
fr_proto_pvc *fr_pvc;
fr_proto_pvc_info *fr_pvc_info;
/* interface settings */
sync_serial_settings *sync;
te1_settings *te1;
} ifs_ifsu;
};
/*
* Interface request structure used for socket
* ioctl's. All interface ioctl's must have parameter
* definitions which begin with ifr_name. The
* remainder may be interface specific.
*/
struct ifreq {
#define IFHWADDRLEN 6
union
{
char ifrn_name[IFNAMSIZ]; /* if name, e.g. "en0" */
} ifr_ifrn;
union {
struct sockaddr ifru_addr;
struct sockaddr ifru_dstaddr;
struct sockaddr ifru_broadaddr;
struct sockaddr ifru_netmask;
struct sockaddr ifru_hwaddr;
short ifru_flags;
int ifru_ivalue;
int ifru_mtu;
struct ifmap ifru_map;
char ifru_slave[IFNAMSIZ]; /* Just fits the size */
char ifru_newname[IFNAMSIZ];
void * ifru_data;
struct if_settings ifru_settings;
} ifr_ifru;
};
#define ifr_name ifr_ifrn.ifrn_name /* interface name */
#define ifr_hwaddr ifr_ifru.ifru_hwaddr /* MAC address */
#define ifr_addr ifr_ifru.ifru_addr /* address */
#define ifr_dstaddr ifr_ifru.ifru_dstaddr /* other end of p-p lnk */
#define ifr_broadaddr ifr_ifru.ifru_broadaddr /* broadcast address */
#define ifr_netmask ifr_ifru.ifru_netmask /* interface net mask */
#define ifr_flags ifr_ifru.ifru_flags /* flags */
#define ifr_metric ifr_ifru.ifru_ivalue /* metric */
#define ifr_mtu ifr_ifru.ifru_mtu /* mtu */
#define ifr_map ifr_ifru.ifru_map /* device map */
#define ifr_slave ifr_ifru.ifru_slave /* slave device */
#define ifr_data ifr_ifru.ifru_data /* for use by interface */
#define ifr_ifindex ifr_ifru.ifru_ivalue /* interface index */
#define ifr_bandwidth ifr_ifru.ifru_ivalue /* link bandwidth */
#define ifr_qlen ifr_ifru.ifru_ivalue /* Queue length */
#define ifr_newname ifr_ifru.ifru_newname /* New name */
#define ifr_settings ifr_ifru.ifru_settings /* Device/proto settings*/
/*
* Structure used in SIOCGIFCONF request.
* Used to retrieve interface configuration
* for machine (useful for programs which
* must know all networks accessible).
*/
struct ifconf {
int ifc_len; /* size of buffer */
union {
char *ifcu_buf;
struct ifreq *ifcu_req;
} ifc_ifcu;
};
#define ifc_buf ifc_ifcu.ifcu_buf /* buffer address */
#define ifc_req ifc_ifcu.ifcu_req /* array of structures */
#endif /* _LINUX_IF_H */