Current File : //usr/include/linux/raid/md_p.h
/*
   md_p.h : physical layout of Linux RAID devices
          Copyright (C) 1996-98 Ingo Molnar, Gadi Oxman
	  
   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2, or (at your option)
   any later version.
   
   You should have received a copy of the GNU General Public License
   (for example /usr/src/linux/COPYING); if not, write to the Free
   Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  
*/

#ifndef _MD_P_H
#define _MD_P_H

#include <linux/types.h>

/*
 * RAID superblock.
 *
 * The RAID superblock maintains some statistics on each RAID configuration.
 * Each real device in the RAID set contains it near the end of the device.
 * Some of the ideas are copied from the ext2fs implementation.
 *
 * We currently use 4096 bytes as follows:
 *
 *	word offset	function
 *
 *	   0  -    31	Constant generic RAID device information.
 *        32  -    63   Generic state information.
 *	  64  -   127	Personality specific information.
 *	 128  -   511	12 32-words descriptors of the disks in the raid set.
 *	 512  -   911	Reserved.
 *	 912  -  1023	Disk specific descriptor.
 */

/*
 * If x is the real device size in bytes, we return an apparent size of:
 *
 *	y = (x & ~(MD_RESERVED_BYTES - 1)) - MD_RESERVED_BYTES
 *
 * and place the 4kB superblock at offset y.
 */
#define MD_RESERVED_BYTES		(64 * 1024)
#define MD_RESERVED_SECTORS		(MD_RESERVED_BYTES / 512)

#define MD_NEW_SIZE_SECTORS(x)		((x & ~(MD_RESERVED_SECTORS - 1)) - MD_RESERVED_SECTORS)

#define MD_SB_BYTES			4096
#define MD_SB_WORDS			(MD_SB_BYTES / 4)
#define MD_SB_SECTORS			(MD_SB_BYTES / 512)

/*
 * The following are counted in 32-bit words
 */
#define	MD_SB_GENERIC_OFFSET		0
#define MD_SB_PERSONALITY_OFFSET	64
#define MD_SB_DISKS_OFFSET		128
#define MD_SB_DESCRIPTOR_OFFSET		992

#define MD_SB_GENERIC_CONSTANT_WORDS	32
#define MD_SB_GENERIC_STATE_WORDS	32
#define MD_SB_GENERIC_WORDS		(MD_SB_GENERIC_CONSTANT_WORDS + MD_SB_GENERIC_STATE_WORDS)
#define MD_SB_PERSONALITY_WORDS		64
#define MD_SB_DESCRIPTOR_WORDS		32
#define MD_SB_DISKS			27
#define MD_SB_DISKS_WORDS		(MD_SB_DISKS*MD_SB_DESCRIPTOR_WORDS)
#define MD_SB_RESERVED_WORDS		(1024 - MD_SB_GENERIC_WORDS - MD_SB_PERSONALITY_WORDS - MD_SB_DISKS_WORDS - MD_SB_DESCRIPTOR_WORDS)
#define MD_SB_EQUAL_WORDS		(MD_SB_GENERIC_WORDS + MD_SB_PERSONALITY_WORDS + MD_SB_DISKS_WORDS)

/*
 * Device "operational" state bits
 */
#define MD_DISK_FAULTY		0 /* disk is faulty / operational */
#define MD_DISK_ACTIVE		1 /* disk is running or spare disk */
#define MD_DISK_SYNC		2 /* disk is in sync with the raid set */
#define MD_DISK_REMOVED		3 /* disk is in sync with the raid set */
#define MD_DISK_FAILFAST	10 /* Send REQ_FAILFAST if there are multiple
				    * devices available - and don't try to
				    * correct read errors.
				    */

#define	MD_DISK_WRITEMOSTLY	9 /* disk is "write-mostly" is RAID1 config.
				   * read requests will only be sent here in
				   * dire need
				   */
#define MD_DISK_JOURNAL		18 /* disk is used as the write journal in RAID-5/6 */

#define MD_DISK_ROLE_SPARE	0xffff
#define MD_DISK_ROLE_FAULTY	0xfffe
#define MD_DISK_ROLE_JOURNAL	0xfffd
#define MD_DISK_ROLE_MAX	0xff00 /* max value of regular disk role */

typedef struct mdp_device_descriptor_s {
	__u32 number;		/* 0 Device number in the entire set	      */
	__u32 major;		/* 1 Device major number		      */
	__u32 minor;		/* 2 Device minor number		      */
	__u32 raid_disk;	/* 3 The role of the device in the raid set   */
	__u32 state;		/* 4 Operational state			      */
	__u32 reserved[MD_SB_DESCRIPTOR_WORDS - 5];
} mdp_disk_t;

#define MD_SB_MAGIC		0xa92b4efc

/*
 * Superblock state bits
 */
#define MD_SB_CLEAN		0
#define MD_SB_ERRORS		1

#define	MD_SB_BITMAP_PRESENT	8 /* bitmap may be present nearby */

/*
 * Notes:
 * - if an array is being reshaped (restriped) in order to change the
 *   the number of active devices in the array, 'raid_disks' will be
 *   the larger of the old and new numbers.  'delta_disks' will
 *   be the "new - old".  So if +ve, raid_disks is the new value, and
 *   "raid_disks-delta_disks" is the old.  If -ve, raid_disks is the
 *   old value and "raid_disks+delta_disks" is the new (smaller) value.
 */


typedef struct mdp_superblock_s {
	/*
	 * Constant generic information
	 */
	__u32 md_magic;		/*  0 MD identifier 			      */
	__u32 major_version;	/*  1 major version to which the set conforms */
	__u32 minor_version;	/*  2 minor version ...			      */
	__u32 patch_version;	/*  3 patchlevel version ...		      */
	__u32 gvalid_words;	/*  4 Number of used words in this section    */
	__u32 set_uuid0;	/*  5 Raid set identifier		      */
	__u32 ctime;		/*  6 Creation time			      */
	__u32 level;		/*  7 Raid personality			      */
	__u32 size;		/*  8 Apparent size of each individual disk   */
	__u32 nr_disks;		/*  9 total disks in the raid set	      */
	__u32 raid_disks;	/* 10 disks in a fully functional raid set    */
	__u32 md_minor;		/* 11 preferred MD minor device number	      */
	__u32 not_persistent;	/* 12 does it have a persistent superblock    */
	__u32 set_uuid1;	/* 13 Raid set identifier #2		      */
	__u32 set_uuid2;	/* 14 Raid set identifier #3		      */
	__u32 set_uuid3;	/* 15 Raid set identifier #4		      */
	__u32 gstate_creserved[MD_SB_GENERIC_CONSTANT_WORDS - 16];

	/*
	 * Generic state information
	 */
	__u32 utime;		/*  0 Superblock update time		      */
	__u32 state;		/*  1 State bits (clean, ...)		      */
	__u32 active_disks;	/*  2 Number of currently active disks	      */
	__u32 working_disks;	/*  3 Number of working disks		      */
	__u32 failed_disks;	/*  4 Number of failed disks		      */
	__u32 spare_disks;	/*  5 Number of spare disks		      */
	__u32 sb_csum;		/*  6 checksum of the whole superblock        */
#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN)
	__u32 events_hi;	/*  7 high-order of superblock update count   */
	__u32 events_lo;	/*  8 low-order of superblock update count    */
	__u32 cp_events_hi;	/*  9 high-order of checkpoint update count   */
	__u32 cp_events_lo;	/* 10 low-order of checkpoint update count    */
#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
	__u32 events_lo;	/*  7 low-order of superblock update count    */
	__u32 events_hi;	/*  8 high-order of superblock update count   */
	__u32 cp_events_lo;	/*  9 low-order of checkpoint update count    */
	__u32 cp_events_hi;	/* 10 high-order of checkpoint update count   */
#else
#error unspecified endianness
#endif
	__u32 recovery_cp;	/* 11 recovery checkpoint sector count	      */
	/* There are only valid for minor_version > 90 */
	__u64 reshape_position;	/* 12,13 next address in array-space for reshape */
	__u32 new_level;	/* 14 new level we are reshaping to	      */
	__u32 delta_disks;	/* 15 change in number of raid_disks	      */
	__u32 new_layout;	/* 16 new layout			      */
	__u32 new_chunk;	/* 17 new chunk size (bytes)		      */
	__u32 gstate_sreserved[MD_SB_GENERIC_STATE_WORDS - 18];

	/*
	 * Personality information
	 */
	__u32 layout;		/*  0 the array's physical layout	      */
	__u32 chunk_size;	/*  1 chunk size in bytes		      */
	__u32 root_pv;		/*  2 LV root PV */
	__u32 root_block;	/*  3 LV root block */
	__u32 pstate_reserved[MD_SB_PERSONALITY_WORDS - 4];

	/*
	 * Disks information
	 */
	mdp_disk_t disks[MD_SB_DISKS];

	/*
	 * Reserved
	 */
	__u32 reserved[MD_SB_RESERVED_WORDS];

	/*
	 * Active descriptor
	 */
	mdp_disk_t this_disk;

} mdp_super_t;

static __inline__ __u64 md_event(mdp_super_t *sb) {
	__u64 ev = sb->events_hi;
	return (ev<<32)| sb->events_lo;
}

#define MD_SUPERBLOCK_1_TIME_SEC_MASK ((1ULL<<40) - 1)

/*
 * The version-1 superblock :
 * All numeric fields are little-endian.
 *
 * total size: 256 bytes plus 2 per device.
 *  1K allows 384 devices.
 */
struct mdp_superblock_1 {
	/* constant array information - 128 bytes */
	__le32	magic;		/* MD_SB_MAGIC: 0xa92b4efc - little endian */
	__le32	major_version;	/* 1 */
	__le32	feature_map;	/* bit 0 set if 'bitmap_offset' is meaningful */
	__le32	pad0;		/* always set to 0 when writing */

	__u8	set_uuid[16];	/* user-space generated. */
	char	set_name[32];	/* set and interpreted by user-space */

	__le64	ctime;		/* lo 40 bits are seconds, top 24 are microseconds or 0*/
	__le32	level;		/* -4 (multipath), -1 (linear), 0,1,4,5 */
	__le32	layout;		/* only for raid5 and raid10 currently */
	__le64	size;		/* used size of component devices, in 512byte sectors */

	__le32	chunksize;	/* in 512byte sectors */
	__le32	raid_disks;
	union {
		__le32	bitmap_offset;	/* sectors after start of superblock that bitmap starts
					 * NOTE: signed, so bitmap can be before superblock
					 * only meaningful of feature_map[0] is set.
					 */

		/* only meaningful when feature_map[MD_FEATURE_PPL] is set */
		struct {
			__le16 offset; /* sectors from start of superblock that ppl starts (signed) */
			__le16 size; /* ppl size in sectors */
		} ppl;
	};

	/* These are only valid with feature bit '4' */
	__le32	new_level;	/* new level we are reshaping to		*/
	__le64	reshape_position;	/* next address in array-space for reshape */
	__le32	delta_disks;	/* change in number of raid_disks		*/
	__le32	new_layout;	/* new layout					*/
	__le32	new_chunk;	/* new chunk size (512byte sectors)		*/
	__le32  new_offset;	/* signed number to add to data_offset in new
				 * layout.  0 == no-change.  This can be
				 * different on each device in the array.
				 */

	/* constant this-device information - 64 bytes */
	__le64	data_offset;	/* sector start of data, often 0 */
	__le64	data_size;	/* sectors in this device that can be used for data */
	__le64	super_offset;	/* sector start of this superblock */
	union {
		__le64	recovery_offset;/* sectors before this offset (from data_offset) have been recovered */
		__le64	journal_tail;/* journal tail of journal device (from data_offset) */
	};
	__le32	dev_number;	/* permanent identifier of this  device - not role in raid */
	__le32	cnt_corrected_read; /* number of read errors that were corrected by re-writing */
	__u8	device_uuid[16]; /* user-space setable, ignored by kernel */
	__u8	devflags;	/* per-device flags.  Only two defined...*/
#define	WriteMostly1	1	/* mask for writemostly flag in above */
#define	FailFast1	2	/* Should avoid retries and fixups and just fail */
	/* Bad block log.  If there are any bad blocks the feature flag is set.
	 * If offset and size are non-zero, that space is reserved and available
	 */
	__u8	bblog_shift;	/* shift from sectors to block size */
	__le16	bblog_size;	/* number of sectors reserved for list */
	__le32	bblog_offset;	/* sector offset from superblock to bblog,
				 * signed - not unsigned */

	/* array state information - 64 bytes */
	__le64	utime;		/* 40 bits second, 24 bits microseconds */
	__le64	events;		/* incremented when superblock updated */
	__le64	resync_offset;	/* data before this offset (from data_offset) known to be in sync */
	__le32	sb_csum;	/* checksum up to devs[max_dev] */
	__le32	max_dev;	/* size of devs[] array to consider */
	__u8	pad3[64-32];	/* set to 0 when writing */

	/* device state information. Indexed by dev_number.
	 * 2 bytes per device
	 * Note there are no per-device state flags. State information is rolled
	 * into the 'roles' value.  If a device is spare or faulty, then it doesn't
	 * have a meaningful role.
	 */
	__le16	dev_roles[0];	/* role in array, or 0xffff for a spare, or 0xfffe for faulty */
};

/* feature_map bits */
#define MD_FEATURE_BITMAP_OFFSET	1
#define	MD_FEATURE_RECOVERY_OFFSET	2 /* recovery_offset is present and
					   * must be honoured
					   */
#define	MD_FEATURE_RESHAPE_ACTIVE	4
#define	MD_FEATURE_BAD_BLOCKS		8 /* badblock list is not empty */
#define	MD_FEATURE_REPLACEMENT		16 /* This device is replacing an
					    * active device with same 'role'.
					    * 'recovery_offset' is also set.
					    */
#define	MD_FEATURE_RESHAPE_BACKWARDS	32 /* Reshape doesn't change number
					    * of devices, but is going
					    * backwards anyway.
					    */
#define	MD_FEATURE_NEW_OFFSET		64 /* new_offset must be honoured */
#define	MD_FEATURE_RECOVERY_BITMAP	128 /* recovery that is happening
					     * is guided by bitmap.
					     */
#define	MD_FEATURE_JOURNAL		512 /* support write cache */
#define	MD_FEATURE_PPL			1024 /* support PPL */
#define MD_FEATURE_MULTIPLE_PPLS        2048 /* support for multiple PPLs */
#define	MD_FEATURE_ALL			(MD_FEATURE_BITMAP_OFFSET	\
					|MD_FEATURE_RECOVERY_OFFSET	\
					|MD_FEATURE_RESHAPE_ACTIVE	\
					|MD_FEATURE_BAD_BLOCKS		\
					|MD_FEATURE_REPLACEMENT		\
					|MD_FEATURE_RESHAPE_BACKWARDS	\
					|MD_FEATURE_NEW_OFFSET		\
					|MD_FEATURE_RECOVERY_BITMAP	\
					|MD_FEATURE_JOURNAL		\
					|MD_FEATURE_PPL			\
					|MD_FEATURE_MULTIPLE_PPLS	\
					)

struct r5l_payload_header {
	__le16 type;
	__le16 flags;
} __attribute__ ((__packed__));

enum r5l_payload_type {
	R5LOG_PAYLOAD_DATA = 0,
	R5LOG_PAYLOAD_PARITY = 1,
	R5LOG_PAYLOAD_FLUSH = 2,
};

struct r5l_payload_data_parity {
	struct r5l_payload_header header;
	__le32 size;		/* sector. data/parity size. each 4k
				 * has a checksum */
	__le64 location;	/* sector. For data, it's raid sector. For
				 * parity, it's stripe sector */
	__le32 checksum[];
} __attribute__ ((__packed__));

enum r5l_payload_data_parity_flag {
	R5LOG_PAYLOAD_FLAG_DISCARD = 1, /* payload is discard */
	/*
	 * RESHAPED/RESHAPING is only set when there is reshape activity. Note,
	 * both data/parity of a stripe should have the same flag set
	 *
	 * RESHAPED: reshape is running, and this stripe finished reshape
	 * RESHAPING: reshape is running, and this stripe isn't reshaped
	 */
	R5LOG_PAYLOAD_FLAG_RESHAPED = 2,
	R5LOG_PAYLOAD_FLAG_RESHAPING = 3,
};

struct r5l_payload_flush {
	struct r5l_payload_header header;
	__le32 size; /* flush_stripes size, bytes */
	__le64 flush_stripes[];
} __attribute__ ((__packed__));

enum r5l_payload_flush_flag {
	R5LOG_PAYLOAD_FLAG_FLUSH_STRIPE = 1, /* data represents whole stripe */
};

struct r5l_meta_block {
	__le32 magic;
	__le32 checksum;
	__u8 version;
	__u8 __zero_pading_1;
	__le16 __zero_pading_2;
	__le32 meta_size; /* whole size of the block */

	__le64 seq;
	__le64 position; /* sector, start from rdev->data_offset, current position */
	struct r5l_payload_header payloads[];
} __attribute__ ((__packed__));

#define R5LOG_VERSION 0x1
#define R5LOG_MAGIC 0x6433c509

struct ppl_header_entry {
	__le64 data_sector;	/* raid sector of the new data */
	__le32 pp_size;		/* length of partial parity */
	__le32 data_size;	/* length of data */
	__le32 parity_disk;	/* member disk containing parity */
	__le32 checksum;	/* checksum of partial parity data for this
				 * entry (~crc32c) */
} __attribute__ ((__packed__));

#define PPL_HEADER_SIZE 4096
#define PPL_HDR_RESERVED 512
#define PPL_HDR_ENTRY_SPACE \
	(PPL_HEADER_SIZE - PPL_HDR_RESERVED - 4 * sizeof(__le32) - sizeof(__le64))
#define PPL_HDR_MAX_ENTRIES \
	(PPL_HDR_ENTRY_SPACE / sizeof(struct ppl_header_entry))

struct ppl_header {
	__u8 reserved[PPL_HDR_RESERVED];/* reserved space, fill with 0xff */
	__le32 signature;		/* signature (family number of volume) */
	__le32 padding;			/* zero pad */
	__le64 generation;		/* generation number of the header */
	__le32 entries_count;		/* number of entries in entry array */
	__le32 checksum;		/* checksum of the header (~crc32c) */
	struct ppl_header_entry entries[PPL_HDR_MAX_ENTRIES];
} __attribute__ ((__packed__));

#endif
blog

blog

1win официальный сайт букмекера — Обзор и зеркало для входа.450

1win официальный сайт букмекера — Обзор и зеркало для входа ▶️ ИГРАТЬ Содержимое 1win Официальный Сайт Букмекера Преимущества Официального Сайта 1вин Зеркало для входа Обзор и Зеркало для Входа Преимущества 1win Зеркало для Входа Преимущества и Функции 1win Удобство и доступность В мире ставок и азарта 1win является одним из …

Read More »

1win официальный сайт букмекера — Обзор и зеркало для входа.477

1win официальный сайт букмекера — Обзор и зеркало для входа ▶️ ИГРАТЬ Содержимое 1win Официальный Сайт Букмекера Преимущества 1win Обзор и Зеркало для Входа Преимущества 1вин Зеркало для Входа В мире ставок и азарта 1вин является одним из самых популярных букмекеров, предлагающих широкий спектр услуг для игроков. В этой статье …

Read More »

1win — официальный сайт букмекерской конторы 1вин.3301

1win — официальный сайт букмекерской конторы 1вин ▶️ ИГРАТЬ Содержимое Официальный сайт букмекерской конторы 1вин Быстрый доступ к ставкам и линиям Преимущества быстрого доступа Преимущества и функции официального сайта 1вин Функции официального сайта 1вин: В мире ставок и азарта 1вин – это имя, которое ассоциируется с надежностью, быстротой и комфортом. …

Read More »

1win — скачать приложение букмекерской конторы.534

1win — скачать приложение букмекерской конторы ▶️ ИГРАТЬ Содержимое Установка приложения 1win Функциональность приложения 1win Главные функции Преимущества использования приложения 1win Как скачать приложение 1win Шаг 1: Установка 1win apk Шаг 2: Установка 1win на ваше устройство Шаг 3: Регистрация и вход в приложение 1win В мире ставок и азарта …

Read More »

Онлайн казино с моментальным выводом и привлекательными бонусами

Онлайн казино с моментальным выводом и привлекательными бонусами Виртуальные гэмблинг-платформы с мгновенным выплатой средств становятся все более привлекательными среди пользователей, стремящихся к максимальному удобству и оперативности. В подобных онлайн-казино необходимо не только наличие обширного выбора развлечений, но и скорость обработки транзакций. Посредством новейших разработок, многочисленные сервисы, например, как вавада, предлагают …

Read More »

Официальный Сайт Играть в Онлайн Казино Pinco.1661 (3)

Пинко Казино Официальный Сайт – Играть в Онлайн Казино Pinco ▶️ ИГРАТЬ Содержимое Pinco Casino: Официальный Сайт Возможности Онлайн Казино Преимущества игроков в Pinco Казино Большой выбор игр Лучшие условия для игроков 24/7 поддержка Как Играть в Pinco Casino В мире онлайн-казино есть много вариантов для игроков, но не все …

Read More »

1win — скачать приложение букмекерской конторы.4289

1win — скачать приложение букмекерской конторы ▶️ ИГРАТЬ Содержимое Установка приложения 1win Функциональность приложения 1win Главные функции Преимущества использования приложения 1win Как скачать приложение 1win Обзор безопасности приложения 1win В мире ставок и азарта 1вин является одним из самых популярных букмекерских контор, которые предлагают своим клиентам широкий спектр услуг и …

Read More »

Cresus casino en ligne Inscription et connexion.2051

Cresus casino en ligne – Inscription et connexion ▶️ JOUER Содержимое Cresus Casino en Ligne : Inscription et Connexion Inscription au Cresus Casino Connexion au Cresus Casino Inscription au Cresus Casino en Ligne Création de votre compte Cresus Casino Connexion au Cresus Casino en Ligne Connexion avec votre compte Cresus …

Read More »

Официальный Сайт Вход на Рабочее Зеркало Vavada.2091

Вавада Казино Официальный Сайт – Вход на Рабочее Зеркало Vavada ▶️ ИГРАТЬ Содержимое Vavada Casino Official Website: Access to the Working Mirror Vavada Вавада зеркало: что это и почему его нужно? Вавада вход: как получить доступ к играм? Vavada Casino Official Website: Access to the Working Mirror Vavada What is …

Read More »

Gates of Olympus Slot Türkiye.3298

Gates of Olympus Slot Türkiye ▶️ OYNAMAK Содержимое Gates of Olympus Slot Nasıl Oynanır Gates of Olympus Slot Özellikleri ve Sembolleri Gates of Olympus Slot Kazanç Oranları ve Ödülleri Ödüller ve Kazanç Oranları Kazanç Oranları ve Ödüllerin Ayrıntıları gates of olympus oyna, Yunan mitolojisine dayanan bir slot oyunudur. Gates of …

Read More »